UNIVERSAL TYPE C LED FOG LIGHT CONVERSION KIT
UNIVERSAL HOUSINGĀ SOLUTION.Ā
If you're looking for an OEM-like LED upgrade, look no further down our Type C fog light which has mounting brackets to suit a wide range of factory fog lamp housing.
Ā
UTMOST COMPLIANCE.
The projector lens optic distributes a very flat and extremely wide pattern which is DOT and ECE standard compliant for road use. Ā
Ā
BULL BARĀ FRIENDLY.
These LED fog lights are a direct fit, using your factory mounting points in behind the standard front bumper, and some aftermarket bull bars which you can view here.
Ā
Ā
THE NITTY GRITTY.
Ā
KEY TECHNICAL DETAILSĀ
These LED fog lights are a direct fit which uses your factory mounting points in behind the standard front bumper, and some aftermarket bull bars listed below.Ā
The projector lens optic distributes a very flat and extremely wide pattern which is DOT and ECE standard compliant for road use. Ā
Ā Once installed we recommend that the beam is adjusted to ensure that it cuts off no higher than 50cm from the ground, with the car 25m away from a wall.Ā
Please check below for a full list of compatible vehicles.Ā
BULL BARSĀ
- TJM:Ā T13 Bull Bars with halogen fog lights T13
- Rhino 4x4:Ā Bull BarsĀ
Ā
TECH SPECS
Ā
| HOUSING MATERIAL | Alloy Heat Sink |
| LED | High Performance Luxeon T LED |
| LUMEN | 960LM (per light) |
| COMPATIBLE VOLTAGE | 12v and 24v |
| LIFESPAN | 50,000hours |
| CONNECTOR TYPE | Sealed |
| CERTIFICATION | CE, E4, RoHs, R87, IP67 |
| FOG LIGHT DRAW | 0.5a @ 13.6v |
| DIAMETER | 90mm |
OEM PART NO#
OE No.: 81210-0W050, 81220-0W040
OE No.: 81210-0W070, 81220-0W070
Ā
WHAT'S INCLUDED
Ā
- 2 x STEDI Universal Type C Fog LightsĀ
- Fasteners Included
Product Information
Product Information
Shipping & Returns
Shipping & Returns
UNIVERSAL TYPE C LED FOG LIGHT CONVERSION KIT
UNIVERSAL TYPE C LED FOG LIGHT CONVERSION KIT
UNIVERSAL HOUSINGĀ SOLUTION.Ā
If you're looking for an OEM-like LED upgrade, look no further down our Type C fog light which has mounting brackets to suit a wide range of factory fog lamp housing.
Ā
UTMOST COMPLIANCE.
The projector lens optic distributes a very flat and extremely wide pattern which is DOT and ECE standard compliant for road use. Ā
Ā
BULL BARĀ FRIENDLY.
These LED fog lights are a direct fit, using your factory mounting points in behind the standard front bumper, and some aftermarket bull bars which you can view here.
Ā
Ā
THE NITTY GRITTY.
Ā
KEY TECHNICAL DETAILSĀ
These LED fog lights are a direct fit which uses your factory mounting points in behind the standard front bumper, and some aftermarket bull bars listed below.Ā
The projector lens optic distributes a very flat and extremely wide pattern which is DOT and ECE standard compliant for road use. Ā
Ā Once installed we recommend that the beam is adjusted to ensure that it cuts off no higher than 50cm from the ground, with the car 25m away from a wall.Ā
Please check below for a full list of compatible vehicles.Ā
BULL BARSĀ
- TJM:Ā T13 Bull Bars with halogen fog lights T13
- Rhino 4x4:Ā Bull BarsĀ
Ā
TECH SPECS
Ā
| HOUSING MATERIAL | Alloy Heat Sink |
| LED | High Performance Luxeon T LED |
| LUMEN | 960LM (per light) |
| COMPATIBLE VOLTAGE | 12v and 24v |
| LIFESPAN | 50,000hours |
| CONNECTOR TYPE | Sealed |
| CERTIFICATION | CE, E4, RoHs, R87, IP67 |
| FOG LIGHT DRAW | 0.5a @ 13.6v |
| DIAMETER | 90mm |
OEM PART NO#
OE No.: 81210-0W050, 81220-0W040
OE No.: 81210-0W070, 81220-0W070
Ā
WHAT'S INCLUDED
Ā
- 2 x STEDI Universal Type C Fog LightsĀ
- Fasteners Included
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
UNIVERSAL HOUSINGĀ SOLUTION.Ā
If you're looking for an OEM-like LED upgrade, look no further down our Type C fog light which has mounting brackets to suit a wide range of factory fog lamp housing.
Ā
UTMOST COMPLIANCE.
The projector lens optic distributes a very flat and extremely wide pattern which is DOT and ECE standard compliant for road use. Ā
Ā
BULL BARĀ FRIENDLY.
These LED fog lights are a direct fit, using your factory mounting points in behind the standard front bumper, and some aftermarket bull bars which you can view here.
Ā
Ā
THE NITTY GRITTY.
Ā
KEY TECHNICAL DETAILSĀ
These LED fog lights are a direct fit which uses your factory mounting points in behind the standard front bumper, and some aftermarket bull bars listed below.Ā
The projector lens optic distributes a very flat and extremely wide pattern which is DOT and ECE standard compliant for road use. Ā
Ā Once installed we recommend that the beam is adjusted to ensure that it cuts off no higher than 50cm from the ground, with the car 25m away from a wall.Ā
Please check below for a full list of compatible vehicles.Ā
BULL BARSĀ
- TJM:Ā T13 Bull Bars with halogen fog lights T13
- Rhino 4x4:Ā Bull BarsĀ
Ā
TECH SPECS
Ā
| HOUSING MATERIAL | Alloy Heat Sink |
| LED | High Performance Luxeon T LED |
| LUMEN | 960LM (per light) |
| COMPATIBLE VOLTAGE | 12v and 24v |
| LIFESPAN | 50,000hours |
| CONNECTOR TYPE | Sealed |
| CERTIFICATION | CE, E4, RoHs, R87, IP67 |
| FOG LIGHT DRAW | 0.5a @ 13.6v |
| DIAMETER | 90mm |
OEM PART NO#
OE No.: 81210-0W050, 81220-0W040
OE No.: 81210-0W070, 81220-0W070
Ā
WHAT'S INCLUDED
Ā
- 2 x STEDI Universal Type C Fog LightsĀ
- Fasteners Included
